ICARO DIDATTICA S.r.l.  

            Stroboscope

Home main

 

 

 
         

 

 P.G.A.9.jpg (1092935 byte)

P.G.A.1.jpg (46639 byte)

2238.00

XENON STROBOSCOPE
The stroboscope facilitates the analysis of the Kinematic characteristics of motion, particularly periodic motion. The basic principle is the emission by a light souce of constant duration flashes at a continuously variable freqency.

 

the stroboscope facilitates the analysis of the kinematic characteristics of motion, particularly periodic motion. The basic principle is the emission by a light source of costant duration flashes at a continuously variable freqency. The electronic stroboscope enables a camera to record the development of the motion to record the development of the motion of a body over time; the photograph will show a sequence of stationary images of  the body at stationary images of the body at constat time intervals. The stroboscpe may be used for photographing the track ( cat.4132.00) and for observation of experiments performed with the apparatus for the study of kinematics and dynamics of rotation (cat.4138.00 etc).

Accessories and spare parts for 2238.00

 

Xenon discharge tube, spare (cat. 2505.30)

Fuse ,250 mA spare 8 cat. 2512.02)

 

 

 

 

 

2238.20

HAND STROBOSCOPE

Black painted metal disc, approximately 250 mm diameter , with 12 equispaced radial slots finger hole.

 

2238.50

FLASH RATE METER

This instrument has been designed especially to permit the measurement with good precision of the working frequency of the Icaro Didattica ripple tank which has a built in stroboscope ( see cat. 4311.00). The adoption of an optical sensor, supplied with the unit, also permits its use in the measurement of the frequency of fleshes from implusive light sources (Xenon stroboscope, etc ) and with suitable adapters and practical set-ups, of a number of periodic phenomena.  

Thechnical features

Range: 1-990 Hz on two frequency bands

Sensitivity: 1 Hz on the Hz x1 scal

Measurement updating time. 1second

Protection : by means of a 250 mA fuse

Power requirements: 110-220V 50-60Hz

In plastic case complete with on/off switch , mains cable with biplug and central earth. Also supplied is an optical probe with 100 cm long connecting lead.

SPARE PARTS FOR 2238.50

2238.52

OPTICAL PROBE

With 100 cm long connecting lead

Fuse, 250 mA ( cat. 2512.02)

THERMOTERS

 

 

wb00721_.gif (1421 byte)

To send to info@icarodidattica.it an e-mail message containing questions or comments on the present Catalogue Produced.
Copyright 1999 ICARO DIDATTICA S.r.l.
Modernized Limited liability company: 14 febbraio 2007