|
| |
|
|
1715.05
PLATFORM
Frame in 60 x 20 mm steel rectangular-
section tubing 1,5 mm thinck, finished with acid-resistant stove enamel.Top
in 18 mm plywood, surfaced with linoleum. Divided lengthwise in 3 pieces.
Edges in T - section anticorodal, polished finish
Dimensions:
cm
300 x 180 x 16 h about |
| 1715.10
PLATFORM
Frame in 60 x 20 mm steel rectangular-
section tubing 1,5 mm thinck, finished with acid-resistant stove enamel.Top in
18 mm plywood, surfaced with linoleum. Divided lengthwise in 3 pieces. Edges
in T - section anticorodal, polished finish
Dimensions
: cm 236 x 180 x 6 h circa |
| 1715.17
SCREEN FOR PROJECTION ROLL-UP
Situated
in alluminium large case anodized it has dimensions 210 x 160 cm about. The
carrying is manual and the recall is a spring.
The
screen is predisposed for the assemblage of the blackboards |
| 1715.21
FIXED BLACKBOARD
It
is realizated with a unic panel platted of laminated plastic of green colour.
The
perimeter frame is predisposed for the application of the screen of
projections (cat. 1715.17)
and
it is equipped of shelf (portagesso cercare)
Dimensions:
250 x 110 cm about
complete
of hardware for the assemblage to wall. |
|
|
1715.22
SLIDING
WALL- MOUNTED BLACKBOARD
Working
dimensions: cm 210 x 160 h
In
Pirelli Riv plastic, green colour.
The
blackboard comprises two vertically sliding panels with counterpoise in sash
channels. Each panel has a crome-plated metal frame for the application of
magnets to hold drawings, maps, etc.
The
sliding model blacboard offers a large working space through the alternating
use of the two panels.
Complete
with fixtures for wall-mounting, and tray for chalk and magnets. |
| |
|
 |
 |
|
1716.11
TEACHER'S SWIVEL
Support a 5 races,with wheels slewing
covering in artificial leather. |
1716.21
FIXED STOOL
Support
a 5 races, height 65 cm.
It
structures in tubular steel,diameter 20mm, painted to fire. Seat in wood of
beech tree, diameter 330 mm. |
1716.50
TEACHER'S CHAIR
It structures in stell chromed back seat
coverin in artificial leather |
1716.55
TEACHER'S SWIVEL
Type
ergonomic, and provided of arms and provision of movements of elevation and the
inclination of the back for the regulation of the position.
Support
a 5 races with wheels slewing.Covering with tall resistance to the fire ,according
to normative
|
|
1716.18
STUDENT'S SWIVEL
Revolving
and raisable has the structure in chromed steel and the body anatomical ,
type ergonomic .Support a 5 races with wheels slewing
,
available
in varius colours
|
1716.31
ADJUSTABLE HEIGHT STOOL
Support a 5 races.In tubular chromed,with it
leans feet fix in wood of beech tree |
1716.41
ADJUSTABLE HEIGHT STOOL WITH
BACKREST
Support
a 5 races. As 1716.31,
but
with back
|
|
|
 |
 |
|
|
EQUIPMENT TROLLEYS
In
60 x 20 mm steel tubing, 1.5 mm thick, trated with acid-resistant epoxy
paint, oven-baked. The 27 mm thick trays are in wood-shaving board,
completely faced with laminated plastic.
These
trolleys are designed for use with the laboratory benches as mobile
extensions.
|
1725.11 TABLE
ANTIVIBRATING FOR BALANCES
Constituted from two sturdy units
in steel, independent between of they, ciascuna equipped of piedini for the
levelling. The panels are in plastic rolled steel. The job plan completely
is covered in plastic rolled steel. The table is equipped with system
antivibrations and marble slab of approximately 45 x 45 x 5 h cm.
|
1740.02
SINK UNITS FOR LABORATORY
The carryng structure is in wood
completaly dressed again in plastic laminate, with tall resistance to the fire
and also a chemical reagents. The sink is in inox steel and it is handled neck
faucet of swan.The movable under sink is equipped of dust-bin.
Dimensions: cm 90 x 50 x 85 h about
|
|
1720.10
EQUIPMENT LABORATORY
Dimensions
obstructed max : cm 90 x 83 x 90 h.
This
equipment is suitable to the joining with the desk benchs or with student
double frontal benches .
|
1720.20
EQUIPMENT LABORATORY
Dimensions
obstructed max : cm 90 x 60 x 90 h
This
equipment is suitable to the joining with student single benches.
|
|
|
